John's FFR Build Site (Assembly Pics 1)

Assembly (Front & Rear-end)
Click on the image to view a more detailed picture.

Front end parts	Cut a notch here for the shock bracket	The shock bracket bolts to a hole in control arm
Front end assembly with FFR bump steer kit		Mustang steering rack	FFR Bumpsteer kit	Breeze offset steering aluminum rack bushings
Breeze offset steering aluminum rack bushings		I replaced the upper control arm bushings with a heim joint		To remove it, run a drill bit around the outer edge
The rubber will work its way out as the drill bit goes around	Pop the metal out with a pneumatic hammer	Thanks to Jeff Hamilton & Heath Hammersmith for this tip		John Lisman's anodized Heim joint. (Very Nice!)
The joints prevent roll binding and improve handling	It's a shame no one will see them	FFR bracket lowers the rear end		Stock shock bracket mounts to the FFr bracket
FFR Upper control arm	I cut 3/4 of a coil off the spring	FFR recommends cutting one full coil
FFR lower control arm	Note the travel limiting strap