John's FFR Build Site (Assembly Pics 2)

Assembly (Gas Tank & Foot Boxes)
Click on the image to view a more detailed picture.

Reproduction AC Pedals from Finish Line	Mustang Pedal Box	Bolt in front of brake pedal arm prevents the rod from pulling out of the Master cylinder	Bend the brake tubing and distribution block bracket to mount the block to the frame	The back side of the pedals is milled to allow the arm to slip in.
Distribution block	Notch removed from gas tank provides extra clearance for quick jack bolts			Fuel filter
This is why you should drill the rivet holes BEFORE the silicon is applied	You drill lots of holes!	Adjusting the pedals (again)	New BFG Radial TA's on refinished Mustang Turbine wheels	FFR Bumpsteer kit. I cut 1" off each tie rod & enlarged the hole in the spindle to make it fit.
It Rolls! 2/27/2000	Throttle cable (closed) I need to check the angle on this. It looks like it will wear fast.	Throttle cable (open)	Drivers footbox & transmission tunnel	Footbox and pedals
Transmission tunnel & foot box seams	Master cylinder & front of drivers foot box	Front brake line bracket	Passinger footbox and trans. tunnel
Footboxes with trans. tunnel cover in place		Pedal box from top	Modified Throttle cable end	Steering shaft cover with the bellows from the Mustang shaft used for weather proofing
Flaming River rag joint replacement shaft and U-joints				Cobra Dog.. So far he's eaten manuals, screws, nuts, bolts, steelwool &, paint brushes