|
Painted body
back
from
Lamberts Paint
Shop
(The good guys  )
|
Ready to mount
|
Defroster vent
tube
|
I bent some
rectangular PVC
tubing to the
contour of the
body
|
The tube is
attached with
double sided foam
tape and screws
through the
defroster vents
|
Defroster vent
|
Defroster vent
|
Cover over
starter
solenoid (Looks a
little like a paint
can cap  )
|
Modified hood
hinge
|
The bolts allow
the hinge to be
adjusted vertical
and horizontally
|
Hood Latch
strike
plate
|
Mount for hood
strut
|
The bottom edge of the dropped foot box is visible so I painted
it black |
Radiator
aluminum
(I
fit the aluminum while the body was on the chassis)
|
Radiator
aluminum
(The rivet
holes were drilled after the body was removed for paint. The panels
were reinstalled after the body was in place.) |
Radiator
aluminum (Passenger side) |
Radiator
aluminum (Drivers side) |
Rear splash
guard
(I fit the splash guards with the body on the chassis)
|
Rear splash
guard
(After the body was removed for painting I drilled the rivet holes)
|
Front splash
guard
(The guards were riveted in place after the body was reinstalled)
|
Wiper and
heater placement
|
Wiper and
heater placement |
Wiper wheel
box
(The location of the tube above or below the wheel box determines
which side the wiper parks on)
|
Wiper wheel
box
( Mounting
the tube above the wheel box parks the wipers on the drivers
side)
|
